LactoStarwith printer
for routine testing of milk
fat: 0%-40% repeatability : +/- 0,02%
protein: 0%-10% repeatability : +/- 0,03%
lactose 0%-10% repeatability : +/- 0,03%
SNF: 0%-15%, repeatability : +/- 0,04%
Minerals: 0%-5,0%, repeatability : +/- 0,02%
Freezing point are being calculated, repeatability : +/- 0,002%
The repeatability for fat is in the range between 0 and 8%: +/- 0.02%.In the measuring range between 8 and 35% fat, the repeatability is: +/- 0.2%
Dimensions (WxDxH): (440x440x200) mm
Weight:15,5 Kg
FermentoFlashwith printer for the automatic analysis of beer.Measurement of alcohol content and extractas well as the values derived from them:density, apparent extract, original wort andosmotic pressure.Dimensions: (300x330x240) mm (BxDxH),Weight: 5 Kg
NovaSafety centrifugeTable centrifuge with angular rotor can be used for the determination offat content according to Dr. N. Gerber’s method as well asfor the determination of the solubility of powdered milk with special Solubilityglasses (ArtNr. 3637)Properties:Automatic interlocking lidAutomatic brake (braking time < 8 s)Centrifugation timer (digital)Heater, thermostatic set point at 65°CCapacity: max. 8 butyrometerTechnical specifications:RCF:350 g +/- 50 grpm:350 U/minEffective radius:170 mmWeight:13 kgDimensions (l x w x h): 470 x 380 x 230 mm
electrical supply : 230V/50..60 Hz
Multipurpose centrifuge SuperVario-N
Centrifuge for the determination of fat according to Gerber, Röse-Gottlieb, Babcock and for the determination of the solubility of milk powder (ADPI)
characteristics:
stainless steel case
Programmable speed from 600 rpm to 1130 rpm in steps of 10 rpm
(corresponds to a g-force of 77 to 372 g, depending on the rotor)
Programmable heating up to 68 ° C in 1 ° steps
Centrifugation time programmable from 1-99 minutes
Automatic safety lid locking
Automatic unbalance shutdown
Automatic brake
Technical specifications:
Connection value: 230 V / 50 .. 60 Hz / 1200 VA
Empty weight: 26 kg
Total height with lid: 460 mm
Ø outside: 670 mm
Filling height: 370 mm
Speed range: 600 to 1130 rpm
Temperature range: room temperature to 68 ° C
Safety
centrifuge for fat content determination acc. to Roese-Gottlieb's method
complete with Head B and inspection book
This centrifuge consists of the same stainless steel centrifuge as
the centrifuge "Super Vario N".
The same HEAD is also used.
important: This Centrifuge is only for Roese-Gottlieb.
8 Mojonnier tubes can be centrifuged at the same time.Speed: 600 U/min.
The differences to the well-known centrifuge consist in the following
point:
• The centrifuge is equipped with a special explosion-proof motor.
• The electronic control unit of this centrifuge is not built in, but
connected to the centrifuge
with an approx. 3 m long shielding
cable.
• This control unit must be installed in an adjoining room of the
explosion-proof laboratory room.
• The acrylic glass cover is also provided with a conductive coating
(protective coating).
This prevents the static
charges.
• For safety reasons, no lid lock must be attached to this
centrifuge.
• The centrifuge has no heating
Dimensions: W x D x H: (435x280x160) mm
Universal water bath WB436-D (digital)
Digital temperature display (actual value)/target temperature setting.
Pt 100 sensor (platinum sensor). Stopwatch (1-100 min with acoustic signal)
Inner and outer housing made of stainless steel
Overheating protection (even when the container is empty), operation with distilled water is recommended
Technical specifications:
Temperature range: up to 100 ° CContent: 18 l
electrical supply: 230V / 50Hz ... 60Hz / 1000 W
Inner dimensions down (WxDxH): (300x280x194) mm
External dimensions (WxDxH): (331x396x265) mm, weight: 10 kg
Universal water bath WB436-A (analog)
Analog temperature setting (adjusting knob),
Temperature display with thermometer ( Thermometer included),Thermostatic heating controller
Stainless steel inner and outer casing
Overheating protection (even when the container is empty), operation with distilled water preferable
Technical specifications:
Temperature range: up to 100 ° C
Content: 18 l
electrical supply: 230V / 50Hz ... 60Hz / 1000 W
Inner dimensions down (WxDxH): (300x280x194) mm
External dimensions (WxDxH): (331x396x265) mm,Weight: 10 kg
Laboratory pH meter Knick 766measuring chain and stand are not included,measuring device for pH, mV and ° C:Electrode adjustment and monitoring self-test, recorder output, automatic calibration with patented Calimatic.Membrane keyboard fluid secure with DIN electrode connection
Laboratory pH meter Knick 765
Automatic device verification
Measuring chain monitoring, calibrated analog recorder output,
calibration with patented Calimatic,
Membrane keyboard fluidsecure, with DIN electrode connection, independent clock.
With RS 232 interface for computer and printer (GLP documentation)
Battery / pocket pH meter
Knick 902 (without electrode).
Robust and chemical-resistant housing, scratch-resistant and high-contrast mineral glass LC display
pH / redox sensors can be used on one device.
Measuring range pH: -2 to 16
Measuring range mV: -1300 to 1300 mV
Operating temperature: (-10 to +55) ° C
Calibration possible with automatic detection or manually
Automatic device and sensor test
WxDxH: (132x156x30) mm, 500g
Knick 904 (Ohne Elektrode)
Robustes und chemikalienresistentes Gehäuse, kratzfestes und kontrastreiches Mineralglas LC-Display
pH/Redox Sensoren können an einem Gerät verwendet werden.
Messbereich pH: -2 bis 16
Messbereich mV: -1300 bis 1300 mV
Betriebstemperatur: (-10 bis +55 )°C
Kalibrierung mit automatischer Erkennung oder manuell möglich.
Automatische Geräte und Sensorüberprüfung
Wie Knick 902(ArtNR.4318) verfügt jedoch zusätzlich einen Datenlogger mit einer Kapazität von 5000 Messwerten, einen Mikro-USB-Anschluss für eine PC-Verbindung
BxTxH: (132x156x30)mm, 500g
pH meter pH4440to measure pH , conductivity and redox potential .During calibration or measurement all important information are shown on the coloured display (measured value, temperature, temperature sensor, condition of the electrode etc). The navigation menu with the 5-button system enables easy handling of the device. Electrodes optionally includedDimensions (WxDxH): (210x150x80) mm, weight: 1.1 kg
SEDILAB-E sediment testerfor serial testing of liquids for particle contamination,particularly for sediment testing of milk,splash-proof design, approx. 800 samples per hour,sharply defined sediment images,220 V / 50 Hz
for 500 ml of milk
reference dryer RD-8for determining the moisture content of powdered milk in accordance with ISO/DIN 5537, IDF 268 samples can be dried simultaneously under precisely defined conditions (87°C / 33 ml/Min airflow).Connections:a) 230 V / 115 V, 520 Wb) 2.5 bar ... 7.5 barTemperature range: adjustable, up to 110.0°CStability:+/- 0.3°C
Dimensions: WxDxH (185x450x240) mm
Weight:9.5 kg
Analytical scale ABS 120-4 N with safety hood, adjustment program CAL for setting the accuracy, external test weights with extra charge. Display switching from piece to weight, percentage determination, convienent recipeVerification or calibration certificate according to DAkks with extra chargeDimension: WxDxH: (213x333x338)mm, Weight: 5,83 kg120g : 0.1mgOther Kern models on request
Analytical scale ABJ 220-4NM 220g:0,1mgwith protection hood,automatic internal adjustment every 4 hours or with a temperature change of > 2°Cdisplay change from piece to weight, percentage determination, RS 232 data interface possible for extra charge.Verification or calibration certificate acc. to DAkks for extra chargeDimensions housing WxDXH: (213x333x338)mm, Weight: 6,35 kg
220 g : 0,1 mg
Other Kern models on request
Precision scale PCB 3000, 3600: 0,01 g
with protective. Recipe memory, piece counting, percentage determination, underfloor weighing possible
Dimension housing: (163x245x65) mm 3600 g: 0.01g
Other Kern models on request
CRYOSTAR I.
automatic cryoscope,(single sample device without printer)
Characteristics:
• Reference method according to DIN / ISO / IDF 5764
• Large touch screen
• New cooling system
• User-friendly, fast, accurate and robust
The freezing curve is shown during the measurement on the graphic color display.
The plateau search (according to standard DIN / ISO / IDF 5764) is carried out and recorded in the best way.
Weight: 8.7 kg, Dimensions (WxDxH): (340x330x290) mm
Jolting volumeter
The device makes it possible to determine the jolting volume or the density of powder and granular products. The device complies with the following standards
ISO 8967 (milk powder)
IDF 134 (milk powder)
USP 616 Method I (pharmaceutical powder)
ISO 8460 (soluble coffee) and others
8 programs, 275 strokes per minute. Number of strokes adjustable from 5-9995
Dimensions (W x D x H): (245 x 200 x 160) mm without stamp, weight: 6.4 kg
ColonyStar bacteria counter
with accessories (art. no. 8501, 8503, 8504, 8505)easy-to-clean plastic casing, height adjustableilluminated area of 145 mm Ø with direct orindirect glare free lighting, frosted glass and clearglass plate with cm 2 und 1/9 cm 2 graduation, elec-trical contact pin with felt tip pen for markingPetri dishes of up to 145 mm Ø can be used. Thesupplied reducing insert can be used for disheswith smaller diameters.220 V/50 Hz, 250 x 230 x 75 mm, 1.7 kg
water bath, 6L
with digital clock up to 999 hours and temperature rise safety
Precise electronics and multiple temperature protection guarantee.Maximum safety in the laboratory. Optical and acoustic alarm at the end of the program and for input acknowledgment, as well as when the fill level is too low, the heating is switched off automatically.
6 l with sloping lid
approx. 13 kg, stainless steel interior WxDxH (277 x 217x 150)
mm, structured stainless steel housingWxDxH (479x289x375) mm
water bath,
with digital clock up to 999 hours and temperature rise safety
Precise electronics and multiple temperature protection guarantee.Maximum safety in the laboratory. Optical and acoustic alarm at the end of the program and for input acknowledgment, as well as when the fill level is too low, the heating is switched off automatically.
24 l with sloping lid
approx. 23 kg, stainless steel interior WxDxH (472 x 267x 200) mm,
structured stainless steel housing (749x349x425) mm
€1,393.00
This website uses cookies to ensure the best experience possible.
